Balloon Chat

Uncategorized Boards => Balloon Chit Chat => Topic started by: Graham Lee on December 20, 2016, 04:41:56 PM

Title: Pump Cleaning
Post by: Graham Lee on December 20, 2016, 04:41:56 PM
I just saw this on facebook,
I would say do not clean the washer as described as this might stretch it.
Clean it by going into the circle rather than around it.

https://www.youtube.com/watch?v=L7HCluQqcZU (https://www.youtube.com/watch?v=L7HCluQqcZU)
Title: Re: Pump Cleaning
Post by: Lee Reilly on January 08, 2017, 11:42:43 AM
My mac pump hasn't been that smooth over the last few events so I thought I'd pull it apart and see if it needs a bit of grease......
Title: Pump Cleaning
Post by: Lee Reilly on January 08, 2017, 11:44:56 AM
(//http://uploads.tapatalk-cdn.com/20170108/33224896f9796a702a3e9ef93188a013.jpg)
(//http://uploads.tapatalk-cdn.com/20170108/a126ea815f08e727c89a958ae9d8af3f.jpg)




Sent from my iPhone using Tapatalk
Title: Re: Pump Cleaning
Post by: zozoo on September 09, 2017, 07:32:18 AM
I really need to clean my Mac pump its really squeaky and bumpy! I've cleaned the hand pumps a lot and always works well after but never my Mac. Do I just unscrew all the screws?? I'm terrified I'll break it  :o  Thank you :)
Title: Re: Pump Cleaning
Post by: Graham Lee on September 09, 2017, 09:06:31 AM
We talked about this at the two care & share days that we run this week.
I was surprised no one cleaned there pumps, hand held and floor standing.

You do have to take them apart sometimes and clean them.
Put the "O" ring in some soapy water for a few minutes and
clean the gunk off the tube and the plastic where the "O" ring sits.
Title: Re: Pump Cleaning
Post by: Graham Lee on September 09, 2017, 09:07:23 AM
Quote from: "zozoo"I really need to clean my Mac pump its really squeaky and bumpy! I've cleaned the hand pumps a lot and always works well after but never my Mac. Do I just unscrew all the screws?? I'm terrified I'll break it  :o  Thank you :)
Yes, just take the top two screws out and the middle section will come out of the tube.
Title: Re: Pump Cleaning
Post by: zozoo on September 11, 2017, 08:47:49 AM
Thank you Graham it's lovely and smooth again now! Another thing that's happened is the top seems to have come unstuck... Do I just glue it back in?? Is there a type of strong glue you can recommend if so please?
Title: Re: Pump Cleaning
Post by: Graham Lee on September 11, 2017, 09:09:15 AM
I use the plumbers plastic contact glue, off down the cabin to check what it's called for you.
Title: Re: Pump Cleaning
Post by: Graham Lee on September 11, 2017, 01:13:27 PM
This is the glue I use. I think the fact it's PVC cement is the main thing if you are
unable to get the exact brand. Try a smaller DIY shop/plumbers merchant if you can.
Title: Re: Pump Cleaning
Post by: zozoo on September 11, 2017, 01:37:09 PM
Brilliant thank you. I'll go shopping!